modeling of chemical wear

Modeling Of Chemical Wear
Author: A. Sethuramiah
Publisher: Elsevier
Release Date: 2015-10-19
Pages: 240
ISBN:
Available Language: English, Spanish, And French
EBOOK SYNOPSIS:

Modeling of Chemical Wear is a one-stop resource for students, researchers and professionals seeking quick and effective tribological evaluations of environmentally friendly and energy efficient products. This book considers optimizing additive combinations by proper methodology, bridging the gap between theory and practice. It defines effective approaches to evaluate antiwear chemical additives commonly used in industry, enhancing the mapping ability of their performance to reduce the extent of full scale evaluations. Provides full coverage of tribology in four concise chapters, including lubricants and additives and up-and-coming nano-level tribology Offers effective empirical modelling of chemical wear, along with computer programs relevant to industry standards to help you improve your test methods Outlines effective methodology for optimization of additive packages, relevant to the present search for eco-friendly combinations

Exam Prep For  Modeling Of Chemical Wear
Author:
Publisher:
Release Date:
Pages:
ISBN:
Available Language: English, Spanish, And French
EBOOK SYNOPSIS:

Tribological Modeling For Mechanical Designers
Author: K. C. Ludema
Publisher: ASTM International
Release Date: 1991
Pages: 185
ISBN:
Available Language: English, Spanish, And French
EBOOK SYNOPSIS:

Thirteen papers from a symposium on [title] held in San Francisco, May 1990, are presented in chapters on: what mechanical designers need in tribological modeling, what is available in tribological models, data base and simulation issues for tribological modeling, and principles of model making and

Approaches To Modeling Of Friction And Wear
Author: Frederick F. Ling
Publisher: Springer Science & Business Media
Release Date: 2012-12-06
Pages: 173
ISBN:
Available Language: English, Spanish, And French
EBOOK SYNOPSIS:

At the conclusion of the Conference on Tribology in the area of Wear Life Pre diction of Mechanical Components, which was held at the General Motors Research Laboratories and sponsored by the Industrial Research Institute, a very high pri ority recommendation was modeling of tribological systems. Since the appearance of the Conference Proceedings in 1985, the writers discussed the matter of modeling with Dr. Edward A. Saibel, Chief of the Solid Mechanics Branch, Engineering Sciences Division, U.S. Army Research Office. This discussion led to a proposal for the Workshop which resulted in this volume. The choice of proposal and Workshop name turned out to be more restricted than it needed to be. As such, the Workshop adopted the name for this volume, Approaches to Modeling of Friction and Wear. By design, the attendance was restricted to not more than 40 individuals so as to allow small group discussions. There were four panels which deliberated on the same questions after two invited area lectures. Section 1 contains the substance of the two lectures. Section 2 is the Workshop Summary which is a distillation of the four panel reports by the entire Workshop attendance. This was formally written up and edited by the eight panel session chairmen, i.e., each of the four panels met twice on two different questions under the leadership of a chairman for each session. Section 3 contains four brief position papers on the subject of the Workshop.

Integrated Modeling Of Chemical Mechanical Planarization For Sub Micron IC Fabrication
Author: Jianfeng Luo
Publisher: Springer Science & Business Media
Release Date: 2004-10-07
Pages: 311
ISBN:
Available Language: English, Spanish, And French
EBOOK SYNOPSIS:

This book is the product of a developing research focus on CMP at Berkeley. Its focus is on the important area of process models which have not kept pace with the tremendous expansion of applications of CMP. It specifically deals with the development of models with sufficient detail to allow the evaluation and tradeoff of process inputs and parameters to assess impact on quality or quantity of production. The important role of the mechanical elements of the process are included in such an "integrated model". The objective of the book is to introduce some background on the overlooked mechanical aspects of the process - including pad surface topography and abrasive particles. The "integrated model" can be particularly useful as one looks towards optimization of the process, design of consumables and, importantly, looking to minimize the environmental affects of CMP.

Wear Of Materials
Author: P Blau
Publisher: Elsevier
Release Date: 2003-10-15
Pages: 1800
ISBN:
Available Language: English, Spanish, And French
EBOOK SYNOPSIS:

The 14th International Conference on Wear of Materials took place in Washington, DC, USA, 30 March - 3 April 2003. These proceedings contain over two-hundred peer reviewed papers containing the best research, technical developments and engineering case studies from around the world. Biomaterials and nano-tribology receive special attention in this collection reflecting the general trends in the field. Further highlights include a focus on the new generation of instrumentation to probe wear at increasingly small scales. Approximately ninety communications and case studies, a popular format for the academic community have also been included, enabling the inclusion of the most up-to-date research. Over 200 peer-reviewed papers including hot topics such as biomaterials and nano-tribology Keeping you up-to-date with the latest research from leading experts Includes communications and case studies

Modern Manufacturing Processes
Author: Muammer Koc
Publisher: John Wiley & Sons
Release Date: 2019-09-24
Pages: 544
ISBN:
Available Language: English, Spanish, And French
EBOOK SYNOPSIS:

Provides an in-depth understanding of the fundamentals of a wide range of state-of-the-art materials manufacturing processes Modern manufacturing is at the core of industrial production from base materials to semi-finished goods and final products. Over the last decade, a variety of innovative methods have been developed that allow for manufacturing processes that are more versatile, less energy-consuming, and more environmentally friendly. This book provides readers with everything they need to know about the many manufacturing processes of today. Presented in three parts, Modern Manufacturing Processes starts by covering advanced manufacturing forming processes such as sheet forming, powder forming, and injection molding. The second part deals with thermal and energy-assisted manufacturing processes, including warm and hot hydrostamping. It also covers high speed forming (electromagnetic, electrohydraulic, and explosive forming). The third part reviews advanced material removal process like advanced grinding, electro-discharge machining, micro milling, and laser machining. It also looks at high speed and hard machining and examines advances in material modeling for manufacturing analysis and simulation. Offers a comprehensive overview of advanced materials manufacturing processes Provides practice-oriented information to help readers find the right manufacturing methods for the intended applications Highly relevant for material scientists and engineers in industry Modern Manufacturing Processes is an ideal book for practitioners and researchers in materials and mechanical engineering.

Wear Modeling
Author: Xianzhong Meng
Publisher:
Release Date: 1994
Pages: 168
ISBN:
Available Language: English, Spanish, And French
EBOOK SYNOPSIS:

Integrated Modeling Of Chemical Mechanical Planarization Polishing  CMP  For Integrated Circuit Fabrication
Author: Jianfeng Luo
Publisher:
Release Date: 2003
Pages: 646
ISBN:
Available Language: English, Spanish, And French
EBOOK SYNOPSIS:

Modeling And Simulation For Material Selection And Mechanical Design
Author: George E. Totten
Publisher: CRC Press
Release Date: 2003-12-02
Pages: 880
ISBN:
Available Language: English, Spanish, And French
EBOOK SYNOPSIS:

This reference describes advanced computer modeling and simulation procedures to predict material properties and component design including mechanical properties, microstructural evolution, and materials behavior and performance. The book illustrates the most effective modeling and simulation technologies relating to surface-engineered compounds, fastener design, quenching and tempering during heat treatment, and residual stresses and distortion during forging, casting, and heat treatment. Written by internationally recognized experts in the field, it enables researchers to enhance engineering processes and reduce production costs in materials and component development.

Chemical Mechanical Polishing In Silicon Processing
Author:
Publisher: Academic Press
Release Date: 1999-10-29
Pages: 307
ISBN:
Available Language: English, Spanish, And French
EBOOK SYNOPSIS:

Since its inception in 1966, the series of numbered volumes known as Semiconductors and Semimetals has distinguished itself through the careful selection of well-known authors, editors, and contributors. The Willardson and Beer series, as it is widely known, has succeeded in producing numerous landmark volumes and chapters. Not only did many of these volumes make an impact at the time of their publication, but they continue to be well-cited years after their original release. Recently, Professor Eicke R. Weber of the University of California at Berkeley joined as a co-editor of the series. Professor Weber, a well-known expert in the field of semiconductor materials, will further contribute to continuing the series' tradition of publishing timely, highly relevant, and long-impacting volumes. Some of the recent volumes, such as Hydrogen in Semiconductors, Imperfections in III/V Materials, Epitaxial Microstructures, High-Speed Heterostructure Devices, Oxygen in Silicon, and others promise that this tradition will be maintained and even expanded. Reflecting the truly interdisciplinary nature of the field that the series covers, the volumes in Semiconductors and Semimetals have been and will continue to be of great interest to physicists, chemists, materials scientists, and device engineers in modern industry.

15th Wear Of Materials
Author: P Blau
Publisher: Elsevier
Release Date: 2005-10-17
Pages: 1600
ISBN:
Available Language: English, Spanish, And French
EBOOK SYNOPSIS:

These proceedings of the 15th International Conference on Wear of Materials focus on the friction and wear of materials in various applications under different environments from the nanometer scale to the meter scale. The conference provides a unique international forum for researchers and practitioners from different disciplines to exchange latest results. Coverage includes: . Wear assessment and monitoring . Wear modeling, mechanisms, mapping and prediction . Wear-corrosion testing and control . Surface engineering for wear and wear-corrosion control . Development of new wear test methods and wear test methodologies . Wear of materials for biomedical applications . Wear of non-equilibrium materials: from atomic dimensions to the micro-scale . Wear of hard and superhard materials . Wear of materials in the earthmoving, minerals processing and mining industries

Metallurgical Coatings And Thin Films
Author:
Publisher:
Release Date: 1991
Pages: 568
ISBN:
Available Language: English, Spanish, And French
EBOOK SYNOPSIS:

Hybrid Modeling And Optimization Of Manufacturing
Author: Ramón Quiza
Publisher: Springer Science & Business Media
Release Date: 2012-02-16
Pages: 95
ISBN:
Available Language: English, Spanish, And French
EBOOK SYNOPSIS:

Artificial intelligence (AI) techniques and the finite element method (FEM) are both powerful computing tools, which are extensively used for modeling and optimizing manufacturing processes. The combination of these tools has resulted in a new flexible and robust approach as several recent studies have shown. This book aims to review the work already done in this field as well as to expose the new possibilities and foreseen trends. The book is expected to be useful for postgraduate students and researchers, working in the area of modeling and optimization of manufacturing processes.

NASA Thesaurus
Author:
Publisher:
Release Date: 1985
Pages:
ISBN:
Available Language: English, Spanish, And French
EBOOK SYNOPSIS:

Thermal Plasma Chemical Vapor Deposition Of Hard  Wear Resistant SI C N Coatings
Author: Nicole Jennifer Wagner
Publisher:
Release Date: 2006
Pages: 246
ISBN:
Available Language: English, Spanish, And French
EBOOK SYNOPSIS:

Modern Tribology Handbook  Two Volume Set
Author: Bharat Bhushan
Publisher: CRC Press
Release Date: 2000-12-28
Pages: 1760
ISBN:
Available Language: English, Spanish, And French
EBOOK SYNOPSIS:

Recent research has led to a deeper understanding of the nature and consequences of interactions between materials on an atomic scale. The results have resonated throughout the field of tribology. For example, new applications require detailed understanding of the tribological process on macro- and microscales and new knowledge guides the rational

Proceedings Of The Cambridge Antiquarian Society
Author: Cambridge Antiquarian Society (Cambridge, England)
Publisher:
Release Date: 2002
Pages:
ISBN:
Available Language: English, Spanish, And French
EBOOK SYNOPSIS:

Proceedings Of The Cambridge Antiquarian Society  With Communications Made To The Society
Author:
Publisher:
Release Date: 2004
Pages:
ISBN:
Available Language: English, Spanish, And French
EBOOK SYNOPSIS:

Handbook Of Materials Behavior Models  Three Volume Set
Author: Jean LeMaitre
Publisher: Elsevier
Release Date: 2001-11-17
Pages: 1200
ISBN:
Available Language: English, Spanish, And French
EBOOK SYNOPSIS:

This first of a kind reference/handbook deals with nonlinear models and properties of material. In the study the behavior of materials' phenomena no unique laws exist. Therefore, researchers often turn to models to determine the properties of materials. This will be the first book to bring together such a comprehensive collection of these models. The Handbook deals with all solid materials, and is organized first by phenomena. Most of the materials models presented in an applications-oriented fashion, less descriptive and more practitioner-geared, making it useful in the daily working activities of professionals. The Handbook is divided into three volumes. Volume I, Deformation of Materials, introduces general methodologies in the art of modeling, in choosing materials, and in the "so-called" size effect. Chapters 2-5 deal respectively with elasticity and viscoelasticity, yield limit, plasticity, and visco-plasticity. Volume II, Failures in Materials, provides models on such concerns as continuous damage, cracking and fracture, and friction wear. Volume III, Multiphysics Behavior, deals with multiphysics coupled behaviors. Chapter's 10 and 11 are devoted to special classes of materials (composites, biomaterials, and geomaterials). The different sections within each chapter describe one model each with its domain of validity, its background, its formulation, the identification of material parameters for as many materials as possible, and advice on how to implement or use the model. The study of the behavior of materials, especially solids, is related to hundreds of areas in engineering design and control. Predicting how a material will perform under various conditions is essential to determining the optimal performance of machines and vehicles and the structural integrity of buildings, as well as safety issues. Such practical examples would be how various new materials, such as those used in new airplane hulls, react to heat or cold or sudden temperature changes, or how new building materials hold up under extreme earthquake conditions. The Handbook of Materials Behavior Models: Gathers together 117 models of behavior of materials written by the most eminent specialists in their field Presents each model's domain of validity, a short background, its formulation, a methodology to identify the materials parameters, advise on how to use it in practical applications as well as extensive references Covers all solid materials: metals, alloys, ceramics, polymers, composites, concrete, wood, rubber, geomaterials such as rocks, soils, sand, clay, biomaterials, etc Concerns all engineering phenomena: elasticity, viscoelasticity, yield limit, plasticity, viscoplasticity, damage, fracture, friction, and wear